electric trolley for electric chain hoist
Product Informations
This ITA electric hoist trolley is mainly used with the ITA ER1 electric chain hoist, which can effectively improve the efficiency of the ITA electric chain hoist, liberate the user’s hands to a greater extent, and reduce the user’s fatigue.
1. Light weight, small limit size, easy installation, easy to load and unload.
2. The working level is high, which has the same working level as the ITA ER1 electric chain hoist.
3. Good safety performance, high reliability and low failure rate. All parts have been finely processed, and the gears are precisely engaged, which effectively reduces possible failures during work.
4. Strong stability, equipped with high-quality motors, and long service life.
5. Low working noise, strong overload capacity and large braking torque.
6. The appearance has been carefully treated, with high anti-corrosion performance, beautiful and durable.
Installation method
1. Assembly of the ITA electric trolley
1) Insert the suspension shaft into the left side plate, install the suspension shaft on the hanger, install the washer, and insert the suspension shaft into the right side plate.
2) Install an external adjustment washer on the suspension shaft. Install a shaft-shaped limit pin on the suspension shaft.
2. Adjust the width of the ITA electric trolley
Please be sure to adjust the width of ITA electric trolley to obtain a suitable gap before use to ensure the normal use of the electric hoist and avoid danger during use.
3. Install ITA electric trolley on the traverse track.
1) From the end of the track, slide the trolley with electric chain hoist on the beam track. This is the most convenient recommended method.
2) If the connector cannot be installed by sliding from the end of the track, please contact our after-sales customer service in time. Our after-sales customers will provide you with a convenient and feasible installation method according to your actual situation. Please do not modify the electric hoist by yourself.
Product Parameters
|
Type |
ET-0.5 |
ET-01 |
ET-02 |
ET-03 |
ET-05 |
ET-07.5 |
ET-10 |
|
|
Capacity(T) |
0.5 |
1 |
2 |
3 |
5 |
7.5 |
10 |
|
|
Size (mm) |
A |
315 |
315 |
325 |
340 |
400 |
400 |
500 |
|
B |
212 |
212 |
220 |
250 |
291 |
291 |
370 |
|
|
R |
142 |
142 |
142 |
142 |
142 |
142 |
142 |
|
|
T |
231 |
231 |
231 |
231 |
231 |
231 |
231 |
|
|
I |
31 |
31 |
36 |
43 |
54 |
54 |
70 |
|
|
Speed (m/min 50Hz) |
11/21 |
11/21 |
11/21 |
11/21 |
11/21 |
11/21 |
11/21 |
|
|
Power (kw) |
0.4 |
0.4 |
0.4 |
0.75 |
0.75 |
0.75 |
0.75 |
|
|
Minimun Turing Radius(m) |
0.8 |
0.8 |
0.8 |
1.0 |
1.8 |
1.8 |
2.5 |
|
|
I-Beam (mm) |
52-153 |
52-153 |
82-178 |
100-178 |
100-178 |
100-178 |
150-220 |
|
