China Wholesale Chain Electric Hoist Manufacturer - ER1 type electric chain hoist – ITA Hoist
China Wholesale Chain Electric Hoist Manufacturer - ER1 type electric chain hoist – ITA Hoist Detail:
Product Features
ITA hoist is made of high-strength alloy, consists of beautiful appearance, compact mechanism, small in size and light weight. And we use double-geared drive, helical gear drive when it works under fast speed, so that the ITA hoist can drive smoothly with low noise.
The components and parts of ITA hoist is high-strength as well. The high strength alloy on the components and parts is going through multiple special technology for heating processing, so that it is high strength and good abrasion performance, the hooks of ITA hoists are made of high strengthen alloy too, which is good in tenacity cause of strength heating processing, it means even the hoist is damaged by overload, the hook will only been plastic distorted but not been brittle fractured.
Shell:
Light aluminum alloy shell shall be adopted and light fit for the use in the terrible work environment with a high heat dissipation rate and all tightness design.
Inverse phase sequence protecting device:
It is the special electrical installation which controls the circuit not to work in case of wiring error in power supply.
Limit switch:
The limit switch device is installed where the weigh is lifted on and off to make the motor to stop automatically so as to prohibit the emergencies from exceeding for safety.
24V/36V device:
It is used to prohibit the emergencies from occurring in case of the leakage in the switch.
Side magnetic braking device:
This device shall realize the instant brake in case of the power dump.
Chain big:
It shall be light, handsome and durable.
Chain:
The chain shall adopt the imported FEC G80 ultra heat-treatable aluminum alloy chain.
ITA-ER1 Single speed electric chain hoist
Model |
Unit |
ITA-ER1 |
|||||||||||||
0.5-01S |
01-01S |
01-02S |
02-01S |
02-02S |
03-01S |
03-02S |
03-03S |
05-02S |
07.5-03S |
10-04S |
15-06S |
20-08S |
25-10S |
||
Lifting weight |
Ton |
0.5 |
1 |
1 |
2 |
2 |
3 |
3 |
3 |
5 |
7.5 |
10 |
15 |
20 |
25 |
Standard lifting height |
M |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
Falls of load chain |
1 |
1 |
2 |
1 |
2 |
1 |
2 |
3 |
2 |
3 |
4 |
6 |
8 |
10 |
|
Power |
KW |
1.1 |
1.5 |
1.1 |
3 |
1.5 |
3 |
3 |
1.5 |
3 |
3 |
2*3.0 |
2*3.0 |
2*3.0 |
2*3.0 |
Dia. of Load chain |
mm |
6.3 |
7.1 |
6.3 |
10 |
7.1 |
11.2 |
10 |
7.1 |
11.2 |
11.2 |
11.2 |
11.2 |
11.2 |
11.2 |
Lifting speed |
m/min |
7.2 |
6.8 |
3.6 |
6.6 |
3.4 |
5.6 |
4.4 |
2.2 |
2.8 |
1.8 |
2.8 |
1.8 |
1.4 |
1.1 |
Voltage |
V |
220-440V |
|||||||||||||
Phases |
3 |
||||||||||||||
Frequency |
Hz |
50/60 |
|||||||||||||
Rotation speed |
r/min |
1440 |
|||||||||||||
Insulation grade |
F |
||||||||||||||
Travelling speed |
m/min |
12 |
11/21 |
||||||||||||
Control Voltage |
V |
24/36/48 |
|||||||||||||
I-beam |
mm |
75-125 |
75-178 |
82-178 |
100-178 |
112-178 |
125-178 |
150/220 |
150/220 |
150/220 |
150/220 |
ITA-ER1 double speeds electric chain hoist
Model |
Unit |
ITA-ER1 |
|||||||||||||
0.5-01D |
01-01D |
01-02D |
02-01D |
02-02D |
03-01D |
03-02D |
03-03D |
05-02D |
07.5-03D |
10-04D |
15-06D |
20-08D |
25-10D |
||
Lifting weight |
Ton |
0.5 |
1 |
1 |
2 |
2 |
3 |
3 |
3 |
5 |
7.5 |
10 |
15 |
20 |
25 |
Standard lifting height |
M |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
Falls of load chain |
1 |
1 |
2 |
1 |
2 |
1 |
2 |
3 |
2 |
3 |
4 |
6 |
8 |
10 |
|
Power |
KW |
1.1/0.37 |
1.8/0.6 |
1.1/0.37 |
3.0/1.0 |
1.8/0.6 |
3.0/1.0 |
3.0/1.0 |
1.8/0.6 |
3.0/1.0 |
3.0/1.0 |
2*3.0/1.0 |
2*3.0/1.0 |
2*3.0/1.0 |
2*3.0/1.0 |
Dia. of Load chain |
mm |
6.3 |
7.1 |
6.3 |
10.0 |
7.1 |
11.2 |
10.0 |
7.1 |
11.2 |
11.2 |
11.2 |
11.2 |
11.2 |
11.2 |
Lifting speed |
m/min |
7.2/2.4 |
6.9/2.3 |
3.6/1.2 |
6.9/2.3 |
3.3/1.1 |
5.6/1.8 |
4.5/1.5 |
2.4/0.8 |
2.8/0.9 |
1.8/0.6 |
2.8/0.9 |
1.8/0.6 |
1.5/0.5 |
1.2/0.4 |
Voltage |
V |
220-440V |
|||||||||||||
Phases |
3 |
||||||||||||||
Frequency |
Hz |
50/60 |
|||||||||||||
Rotation speed |
r/min |
1440 |
2880/960 |
||||||||||||
Insulation grade |
F |
||||||||||||||
Travelling speed |
m/min |
12 |
11/21 |
||||||||||||
Control Voltage |
V |
24/36/48 |
|||||||||||||
I-beam |
mm |
75-125 |
75-178 |
82-178 |
100-178 |
112-178 |
125-178 |
150/220 |
150/220 |
Product detail pictures:
Related Product Guide:
Our company since its inception, constantly regards product or service high quality as business life, continually improve creation technology, make improvements to product high-quality and consistently strengthen business total high-quality management, in strict accordance together with the national standard ISO 9001:2000 for China Wholesale Chain Electric Hoist Manufacturer - ER1 type electric chain hoist – ITA Hoist , The product will supply to all over the world, such as: New Zealand, Hamburg, Romania, With the enterprising spirit of" high efficiency, convenience, practicality and innovation", and in line with such serving guidance of "good quality but better price, " and "global credit", we've been striving to cooperate with the automobile parts companies all over the world to make a win-win partnership.
By Chris from Bulgaria - 2018.10.09 19:07
Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
By Ruby from Salt Lake City - 2017.07.28 15:46