CDH Vertical steel plate clamp
Product Informations
The CDH vertical steel plate clamp are made of low-alloy high-strength structural steel, and are integrally cast by heat treatment. vertical steel plate clamp have universal rings, which are widely used, safe and flexible. Only suitable for vertical lifting of steel plates. CDH vertical steel plate clamp are equipped with a spring locking device to prevent the goods from falling off during use. vertical steel plate clamp are often used with other slings. They are economical and simple to operate. They are indispensable and important lifting tools in the factory, workshop and daily life.
feature of product:
1.Standard design clamp for vertical lifting of steel plates and steel structures. The spring-loaded tightening lock mechanism assures a positive initial clamping-force.
2.Clamp are equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered.
3.The clamp is locked in closed as well as in open position.
4.High-frequency quenching of die-forged special alloy steels gives greater durability to the cam.
5.Manufactured from high quality carbon steel.
Pay attention to the use of vertical steel plate clamp:
1. Suspension installation work must be carried out by a qualified person for suspension installation work.
2. Choose tongs that match the purpose.
3. Use within the allowable load range without overloading.
4. Use within the allowable plate thickness range.
5. Do not enter the hoisting operation area.
6. Do not knock or impact hanging objects and spreaders.
7. Don’t make the suspended objects move sharply or stop sharply.
8. Avoid heavy lifting. For safety, it is better to use more than 2 tongs.
9. Check before use, bite, gasket, blockage between teeth, wear state and other abnormal phenomena, check before use.
10. It is strictly forbidden to use it for turning over items.
Product Parameters
Model |
WLL (ton) |
Jaw Opening (mm) |
Weight (kg) |
CDH0.8 |
0.8 |
0-16 |
2.8 |
CDH1 |
1.0 |
0-22 |
3.6 |
CDH2 |
2.0 |
0-30 |
5.5 |
CDH3.2 |
3.2 |
0-40 |
10 |
CDH5 |
5.0 |
0-50 |
17 |
CDH8 |
8.0 |
0-60 |
26 |
CDH10 |
10.0 |
0-80 |
32 |
CDH12 |
12.0 |
0-90 |
48 |
CDH16 |
16.0 |
60-125 |
80 |
CDH30 |
30.0 |
80-220 |
125 |